|
|
 |
 |
The items required for volumetric titration are a Karl Fischer titrant and methanol or a dehydrated solvent (used to dissolve or disperse the sample).
AQUAMICRON® offers a wide range of products suitable for measuring the moisture content of various samples at every levels. Users can select a solvent that is suitable for the samples based on the following tables. |
SS-Z Series (pyridine-free and chloroform-free type)
| Product name |
Use |
Specification |
Package |
|
|
Titrant SS-Z 1mg |
[For General-use]
Low moisture content Samples |
Titer
0.7-1.2
mgH2O/mL |
500mL |
Titrant SS-Z 3mg |
[For General-use] |
Titer
2.5-3.5
mgH2O/mL |
500mL |
Titrant SS-Z 5mg |
[For General-use]
High moisture content Samples |
Titer
4.5-5.5
mgH2O/mL |
500mL |
| 1L |
| Solvent GEX |
[For General-use]
Organic solvents, Inorganic chemicals, Agricultural chemicals, Pharmaceuticals, Fertilizers, Detergents, Foodstuffs, etc. |
Moisture maximum
0.2mgH2O/mL |
500mL |
| Solvent OLX |
[For Oils]
Naphtha, Gasolone, Diesel oil, Electrical insulation oil, etc. |
Moisture maximum
0.5mgH2O/mL |
500mL |
| Solvent OLII |
[For Oils and Fats]
Naphtha, Gasolone, Diesel oil, Heavy oil, Electrical insulation oil, Oils and Fats(Hardened oil, Margarine, etc.),etc. |
Moisture maximum
0.2mgH2O/mL |
500mL |
| Solvent KTX |
[For Ketones]
Ketones, Silicone oils, Acetic and other lower carboxylic acids, aldehydes(except acetaldehydes),etc. |
Moisture maximum
0.5mgH2O/mL |
500mL |
| Solvent SU |
[For Sugars]
Sugars, Proteins, Gelatine, Additives, Animal feeds, etc. |
Moisture maximum
0.2mgH2O/mL |
500mL |
|
| When using a moisture vaporization method, mix Solvent GEX with propylene glycol(PG) in a 3:1 ratio (e.g. 90mL of GEX + 30mL of PG). |
| When using Solvent KTX, it will be needed to make proper adjustments to the parameters. Please contact a manufacturer of the instruments. |
| An addition of 3g of salicylic acid enables the time for dehydration to get shorter at the first measurment in combined use of 50mL of Solvent SU. |
|
|
SS Series (pyridine type)
| Product name |
Use |
Specification |
Package |
|
Titrant SS 1mg |
[For General-use]
Low moisture content Samples |
Titer
0.7-1.2
mgH2O/mL |
500mL |
Titrant SS 3mg |
[For General-use] |
Titer
2.5-3.5
mgH2O/mL |
500mL |
Titrant SS 10mg |
[For General-use]
High moisture content Samples |
Titer
8-12
mgH2O/mL |
500mL |
| 1L |
| Solvent ML |
[For General-use]
Organic solvents, Inorganic chemicals, Agricultural chemicals, Pharmaceuticals, Fertilizers, Detergents, Foodstuffs, etc. |
Moisture maximum
0.2mgH2O/mL |
500mL |
| Solvent MS |
[For General-use]
Organic solvents, Inorganic chemicals, Agricultural chemicals, Pharmaceuticals, Fertilizers, Detergents, Foodstuffs, etc. |
Moisture maximum
0.2mgH2O/mL |
500mL |
| Solvent CM |
[For Oils]
Naphtha, Gasolone, Diesel oil, Heavy oil, Electrical insulation oil, Oils and Fats(Hardened oil, Margarine, etc.),etc. |
Moisture maximum
0.3mgH2O/mL |
500mL |
| Solvent CP |
[For Ketones]
Ketones, Silicone oils, Acetic and other lower carboxylic acids, aldehydes(except acetaldehydes),Anilines, etc. |
Moisture maximum
0.5mgH2O/mL |
500mL |
| Solvent PP |
[For Aldehydes]
Acetaldehydes, propionaldehydes, Butyraldehydes, etc. |
Moisture maximum
0.2mgH2O/mL |
500mL |
| Solvent PE |
[For Ketones]
Ketones, Silicone oils, Acetic and other lower carboxylic acids, aldehydes(except acetaldehydes),Anilines, etc. |
Moisture maximum
mgH2O/mL |
500mL |
| Solvent FM |
[For Sugars]
Sugars, Proteins, Gelatine, Additives, Animal feeds, etc. |
Moisture maximum
0.2mgH2O/mL |
500mL |
| Solvent ME |
[For Vaporizer]
Gaseous samples, Nitrogen, etc. |
Moisture maximum
mgH2O/mL |
500mL |
|
| When using a moisture vaporization method, mix Solvent MS with propylene glycol(PG) in a 3:1 ratio (e.g. 90mL of MS + 30mL of PG). |
| An addition of 3g of salicylic acid enables the time for dehydration to get shorter at the first measurment in combined use of 50mL of Solvent FM. |
|
|
|
